Digital and Sound Card Cables
Pure Signal. Pure Sound.

The cable consists of very high grade silver plated copper wire (75% silver, 25% copper) covered in 2 thin layers
of Kapton to protect from oxidation (humidity and air) then in a thicker layer of Teflon to help insulate the wire
and protect the wire from damage. Each channel is covered in its own layer of silver shielding to help protect
from EMI interference and other unwanted outside interferences from entering the cable. Cardas Quad Eutectic
solder is used to achieve the best possible contact between the wire and the connection.

Below you can see the possible options of available sleeving colors for the digital and sound card cables.


Click image to enlarge.


Click image to enlarge.


Click image to enlarge.

APureSound heatshrink will be added to the cable as a brand of authenticity.

Length AES / EBU Digital RCA / BNC Digital EMU 1212 or 0404 Apogee Duet
1ft $120 $100 $130 $160
2ft $130 $110 $140 $170
3ft $140 $120 $150 $180
4ft $150 $130 $160 $190
5ft $160 $140 $170 $200
6ft $170 $150 $180 $210
7ft $180 $160 $190 $220
8ft $190 $170 $200 $230
9ft $200 $180 $210 $240
10ft $210 $190 $220 $250
Options: Neutrik XLR
Neutrik RCA
Neutrik BNC
Switchcraft RCA (add $10)
Cotton/Carbon Insulation (add $30)
APureSound 0404
Neutrik Mono 1/4in
APureSound Duet
Neutrik RCA
Switchcraft RCA (add $10)
Cotton/Carbon Insulation (add $30)
For each additional foot add $15.

Photo Gallery
Click image to enlarge.

AES/EBU Digital

RCA Digital

EMU 0404

Apogee Duet

Custom colors and connectors are available at an additional cost.
Custom length requests, including non-exact feet lengths, are available upon request at scaled normal cost.
The wire was designed by and specially manufactured for APureSound and is not available anywhere else.

© 2009 APureSound.com, All Rights Reserved.